Industrial Lights Australia Warehouse:
When compared to traditional lighting, Industrial Lights Australia offers many advantages. LEDs offer a higher quality of light and energy efficiency, but there are some things that they can do for large open spaces and warehouses. This is due to the technological differences in led lighting solutions and traditional lighting. For a detailed, issue-by-issue analysis of LEDs versus traditional warehouse lights such as fluorescents or metal halides (a type HID bulb), please see the links below. Focus on the main LED features that allow them to have large advantages in large warehouse lighting or lighting for sports complexes.
Most warehouses use either linear fluorescent lamps or metal halide lamps. Although fluorescents and metal-halides are an improvement on incandescent bulbs, they still have issues such as disposal hazards, shorter life spans, and lower efficiency light when compared to commercial led lights. This is the stuff that everyone knows. These are the many things that can make a huge difference in your lighting planning efficiency.
LEDs eliminate warm-up times:
Metal Halide lamps are notorious for taking a long time to heat up (15-20 minutes to reach full power). Large sports stadiums often turn on their lights before the sunsets. The lights must be on for between 20 and 25 minutes before the stadium needs them. This means that they are burning energy before they are actually needed. By the way, because metal halides have lower efficiency at lower power, they burn more energy per unit light output (lumens) when they heat up to full power. Many stadiums have switched to outdoor led flood lights. Here is a list of early adopters of commercial led lighting in the sports industry.
Dimming Lighting:
Industrial outdoor lights need specific hardware to dim. This hardware is easy to find and install and can add significant value to your overall led lighting solutions. LEDs are more efficient than metal halide bulbs when they run at a lower power. The bulb's lifespan will increase if it is used at a lower power level. Facility managers can save even more money by managing their lighting intelligently. Facilities that use LEDs in a "smart lighting solution" will include high-efficient lighting systems LED lights and sensors (such as timers and motion devices) that can adapt to the specific facility's traffic patterns. This is known as "adaptive lighting", and it can be a great way to save money at your facility.
LEDs are capable of frequent switching:
A major problem with metal halide lights is the inability to turn off lights when they are not in use. It takes around 15-20 minutes to turn off a metal halide. This means that the lights may need to be left on for longer than normal. The lights should be on for at least 30 to 45 minutes before they stop working. It would be too difficult to turn them off again and could cause problems. The batten lights Australia can be quickly turned off and then turned on again without any degradation of the light output or device. This means that energy and the device's lifespan will not be compromised by not using them.
Industrial lighting solutions & commercial led lights offer a better solution for large facilities that want to reduce their energy consumption and maintain a low maintenance cost. Switching to industrial lighting Australia can help organizations save money immediately. We can help! Stouch Lighting can help you with a complete review of your lighting system and a plan to retrofit your facility with a better one.
No comments:
Post a Comment